Polyvine Size for Leaf and Foil
Polyvine Size for Leaf and Foil
Description
Acrylic Size for Leaf and Foil
Acrylic adhesive size with an extended open time for bonding metal leaf and foils to a variety of surfaces.
When this size is applied thinly the surface will remain primed for up to 24 hours, allowing large projects to be handled with ease. It is ideal for interior metal leaf work and for use with any of our Whitson's Decorative Foils.
Application
Seal porous surfaces with a Polyvine varnish. Apply thinly using a good quality brush. It is important no brush marks are visible these will show though the metal leaf. The size can be diluted with water to avoid brush marks. Leave for at least 15 minutes, the film will clear and remain tacky. The surface will then be in a prime state ready to receive the leaf. This prime state will remain indefinitely. It is important to completely cover all the size with the metal leaf, no size should be left uncovered.
Caution
Always try the technique on a test piece before embarking on the project.
Storage
Protect from extremes of temperature during storage and application.
Contact us for MSDS/TDS.
You may also like
-
Whitson's Foils
Silver Satin
-
Colours
016/3
-
Tadelakt
Tadelakt Moroccan Plaster
-
Whitson's Foils
Cracked Gold
-
Colourants
Green 61 Colourant
-
Soaps
Paste of Marseille Soap
-
Colours
037/3
-
Colours
007/3
-
Colours
033/3
-
Metallic Marmorino
Marmorino Metallic Silver
-
Colours
014/3
-
Tools
Polished Plaster Spatulas